WARNING: Make sure what kind of acrylic type you choose.
Here is the example of wrong settings.
It "craft" a really wide lines with 0.5mm deep. Obviously it is not cutting through.
It also burn a bit with bad smell.
Lab acrylic i thing is Extruded Acrylic which i can successfully cut through.
At last it cut through happily :)
Lab manager told me that he called the manufacturer of VLS 3.50 and they said our machine have the powder to cut through 7mm acrylic. Therefore, unless you are cutting 7mm (cause you will set as 7.5mm) otherwise using the default setting at the driver is more then enough. (Just remember to add at least 0.5mm in any material you are cutting)
0 comments:
Speak up your mind
Tell us what you're thinking... !